UMBROLL SHUTTER

GREAT SOLUTION IF YOU’RE LOOKING FOR QUALITY SHUTTERS

Choose uncompromising quality! With Umbroll shutter, you can be sure!

The shutter is a traditional blind, perfect for shielding and protecting old and modern family houses, condominiums, factory buildings or offices. You can adjust the amount of light entering the shaded building by adjusting the position of the shutters. When lowered, they perfectly protect you from UV rays and prying eyes.


Shutter features:

The shutter can be used not only to adjust the lighting conditions, but also to reduce noise from the street. Use them to reduce the heating and cooling energy consumption of the building. In addition to their economic benefits, it is important to highlight their safety function. The shutters protect the most vulnerable parts of the buildings, the windows.


Shutter lamella:

There are two types of plastic and aluminum lamella.


Plastic slats are made of high-quality extruded PVC granules. The aluminium slats are rolled and their surface is protected by a UV-stable lactation layer. The inside of the aluminium slats is sealed with insulating foam. To choose the slats, take a personal look at our swatches!

Structure colour:

Structures can be ordered in the base colours indicated for each type or in any colour of the RAL colour gamut at an additional cost.

Wooden frames are also available for the external case ALUROLL, ALUHID models and their COMBI variants, as well as for shutters with a case that can be mounted on them, wooden frames are available at an additional cost.

Operation:

The shutters can be operated with a elastic band, cord, crank or motor.

Motorized shutters can be automated to optimize the energy consumption of the shaded building.

Safety:

The shutters can also be equipped with a push-up inhibitor or lockable/lockable locking bar for even greater protection against break-ins.


OUTER CASE PLASTIC SHUTTER

POLYPLAIN
Plastic blinds with the simplest construction. It has 45 degrees curved, galvanized and painted plates at the top and bottom.
POLYROLL
The most popular type of outer case plastic shutters. At the bottom it has a 45 degree curved, galvanized and painted plate, which closes with
aluminium side ends. Its operation, thanks to brush run-off rails and dust bearings, is quiet.
POLYROLL COMBI
Polyroll outer case plastic shutter is a double-run rail version. It has an integrated blind mosquito net in the shutters. Tip: At least one COMBI type per room is recommended for undisturbed ventilation.

POLYHID
Plastic shutters, plasterable outer case. If the location of the blinds is built during construction, the polyhid case can be completely hidden in the plaster. Its operation, thanks to brush run-off rails and dust bearings, is quiet.
POLYHID COMBI
A Polyhid POLYHID COMBI
Polyhid outer case plastic shutter is a double runway rail version. It has an integrated blind mosquito net in the shutters. Tip: At least one COMBI type per room is recommended for undisturbed ventilation.


OUTER CASE ALUMINIUM SHUTTER

ALUROLL
The most popular version of the outer case aluminum shutters. At the bottom it has a 45 degree curved, galvanized and painted plate, which closes with aluminum side ends. Its operation, thanks to brush run-off rails and dust bearings, is quiet.
ALUROLL COMBI
Double-mounted rail version of the aluminium shutter with Aluroll outer case. It has an integrated blind mosquito net in the shutters. It is recommended to choose at least one COMBI type per room for undisturbed ventilation.
OWAL
Aluminium blinds with outer case. It has a fashionable oval-shaped extruded aluminium case and side ends. Its operation, thanks to brush run-off rails and dust bearings, is quiet.
OWAL COMBI
Double-run rail version of the Owal outer case aluminium shutter. It has an integrated blind mosquito net in the shutters. Tip: At least one COMBI type per room is recommended for undisturbed ventilation.
ALUHID
Aluminium blinds with a plasterable outer case. If the shutter is located during construction, the ALUHID case can be perfectly hidden in the plaster. Its operation, thanks to brush run-off rails and dust bearings, is quiet.
ALUHID COMBI
Double-mounted rail version of the aluminium shutter with a plasterable outer case. It has an integrated blind mosquito net in the shutters. Tip: At least one COMBI type per room is recommended for undisturbed ventilation.

SHUTTER WITH CASE THAT CAN BE MOUNTED ON

POLY-INTEGROLL
Plastic shutters with a case that can be mounted on it. Unlike the external case shutters, the shutters can be installed not retrofitted, but with the doors and windows, and their mounting openings face in the direction of the room. Adapter profile makes it easy to connect to all doors and windows.
POLY-INTEGROLL COMBI
Poly-Integroll is a double-rail version of a plastic blind with a mountable case. It has an integrated blind mosquito net in the shutters. Tip: At least one COMBI type per room is recommended for undisturbed ventilation.
ALU-INTEGROLL
Aluminium blinds with a case that can be mounted on it. Unlike the external case shutters, the shutters can be installed not retrofitted, but with the doors and windows, and their mounting openings face in the direction of the room. Adapter profile makes it easy to connect to all doors and windows.
ALU-INTEGROLL COMBI
Alu-Integroll is a double-rail version of the aluminium shutter with a mountable case. It has an integrated blind mosquito net in the shutters. Tip: At least one COMBI type per room is recommended for undisturbed ventilation.

LARGE SHUTTER

ROLLERGATE
A large version of the aluminium shutters with an outer case is suitable for shading larger surfaces thanks to its45 mm high lamelos. At the bottom it has a 45 degree curved, galvanized and painted plate, which closes with aluminum side ends. Due to their large size, it is recommended to operate them on a motorized scale.
ROLLERGATE-M
In form, the outer case is similar to aluminium shutters, but its housing and run-off rails are larger and stronger. The shutter blades are 55 mm high, making them perfect for garage doors. Due to their large size, they can only be operated by motor.
ROLLERGATE-L
The ideal solution for garage doors is that the 77 mm high blades are suitable for the safe sealing of large surfaces. The advantage of sectional gates is that they do not take up space on the ceiling, but are wrapped in the case when opened.

Follow Us

Get our news delivered directly to your inbox.

%d bloggers like this: